3 Circuit Track Installation Information

PDF File
Installation of 3 Circuits Track Adaptor
 
  1. Turn dial to "off" position
     
  2. Switch lever to open
Insert tract adaptor

1.Switch kever and lock in place

2.Turn dial to number selection

Removing 3 Circuits Track Adaptor

1.Turn dial to off position

2.Switch lever to open

Remove tract adaptor angle from dial end of adaptor
  • 4-Wire Track Lighting Checklist
     
  • When planning your requirements prepare a layout to ensure correct selection of components.
     
  • Examples are provided to assist with your planning.
     
  • Be aware of left/right options for your live ends and elbow joiners.
     
  • Ensure guide lug on track aligns with live end.
     
  • To secure connectors to track use lock screws and ensure end cap(s) affixed securely to safely terminate track end(s).
Example 1-Basic Straight Option

Ensure guide lug on track aligns with live end.

As track has no direction it can be reversed to line up with live end.

Example 2-Square Track Option
In this example consistent Elbow joiners used in the square to en-sure neutral (green line) is maintained throughout the run.
Example 3-Left/Right Angles Option
In this example different Elbow joiners are used to ensure neutral (green line) is maintained throughout the run.