Share to ROPE12RGBW20 description 12V DC Open LED Colour Changing Strip Light. 20W per metre. It is recommended that these are to stuck on metal material that can act as a heat sink. This is not recommended to be run at 24 hours per day, the maximum we recommend is 8 hours continuous use per day. If butting runs up in configurations like long straight runs, or rectangles especially, there will be slight differences in intensity due to voltage drop. To minimize this, we suggest using a thicker gauge cable. Wattage Per Metre 20W Input 12V DC Beam Angle 120° IP Rating IP20 Maximum Single Run 3m (without voltage drop)；5m (with voltage drop)；6m (without voltage drop if power from both end) Dimmable Yes, via RGBW controller [see LEDRGBW12/24CON or LEDRGBWCONKIT] RGB Requirement Require RGBW controller [see LEDRGBW12/24CON or LEDRGBWCONKIT] Adhesive Backing Yes LED Type SMD 5050 LED per Series 60 per metre LED Colour RGBW Width 11 mm Height 5 mm Cuttable Size 50 mm PDF File Add Inquiry Call Us Recommended Products
