Share to ROPE24RGBW20 description 24V DC Open LED Colour Changing Strip Light. Available in 20W per metre. RGBW(6000K) strip suitable for commercial and residential installations. Variety of control methods available including, DMX512, DALI DT6 and Radio Frequency. Standard 5 wire style PCB, compatible with most other 5 wire style receivers on the market. Suggested run times of 8-10 hours per day. It is recommended that these are to stuck on metal material that can act as a heat sink. This is notrecommended to be run at 24 hours per day, the maximum we recommend is 8 hours continuous use per day. If butting runs up in configurations like long straight runs, or rectangles especially, there will be slight differences in intensity due to voltage drop. To minimize this, we suggest using a thicker gauge cable or power from both ends. Wattage Per Metre 20W Input 24V DC Beam Angle 120° IP Rating IP20 Length per Reel 6m (Tails on both side) Maximum Single Run 3m Dimmable Yes, via RGBW controller [see LEDRGBW12/24CON or LEDRGBWCONKIT] RGB Requirement Require RGBW controller [see LEDRGBW12/24CON or LEDRGBWCONKIT] Adhesive Backing Yes LED Type SMD 5050 LED per Series 60 per metre LED Colour RGBW Width 12 mm Height 3 mm Cuttable Size 100 mm PDF File Add Inquiry Call Us Recommended Products
