new Share to ROPE24-CCT22WCB description 24V DC premium strip light bringing a ‘COB-Like’ look to strip light. High chip configuration in special coating allows for a seamless line-of-light look with a CRI rating of 90. Supports white settings from 2700K to 6000K. A suitable 3 core cable and controller gear is required for operation. The strip is rated as 22w/ metre - however when on 2700k or 6000k only setting, the draw will only be ~11w/m . When on 4000k mode, the strip will be drawing max ~ 22w/m as both channels are engaged. We always recommend sizing transformers and controller/ amplifier gear to handle at least 22w/m. Suggested run times of up to 8-10 hours per day. It is recommended that these are to stuck on metal material that can act as a heat sink. This is not recommended to be run at 24 hours per day, the maximum we recommend is 8 hours continuous use per day. If butting runs up in configurations like long straight runs, or rectangles especially, there will be slight differences in intensity due to voltage drop. To minimize this, we suggest using a thicker gauge cable, please consult with our sales team if you’re not sure. When mounting to kicks or anywhere where the strip can be touched, we always recommend mounting into a channel. Any strips mounted not pointing directly up should have additional adhesive applied at intervals to aid in long term hold. IP Rating 20 Dimmable Yes (via compatible CCT controller gear) Requires mounting to heatsink Yes Comes with Adhesive Backing Yes, we suggest to also add dabs of silicone at intervals to aid in long term hold, especially if installed facing down wards to floor Max single run 5m to avoid voltage drop. Metre per Roll: 10m Wattage/Metre Single Channel ~11w/m ; Dual Channel ~22w/m Input 24VDC Lumen Single Channel ~900 to 1150 lm ; Dual Channel ~ 2000lm Beam Angle 120o LED Colour Tuneable between 2700k and 6000k Size W x H 10mm PDF File Add Inquiry Call Us Recommended Products